Installation Heater

Yes in some instances, you may need to cut and turn the mats to suit the shape of the room. However, it is essential that you not cut, twist or kink the heating element. Watch our installation video for more guidance:

The floor probe for the Warmup thermostat should placed centre of two element heating runs at least 300mm into the heated area. Ensure that the floor probe does not touch or cross any of the heating cables. Feel free to cut or chisel a channel into the insulation or sub-floor to avoid the sensor probe from […]

Yes you can heat under glass tiles. The thin-set holds the heat. The glass (silicon) isn’t a very good conductor but the thin-set does the work.

Outlined description of when to test your DCM-PRO cable and why you should do it.

This page explains the positioning of the factory joint to ensure a successful installation of your Warmup heating system.

The conductor cores and ground braid of the 10′ cold lead are factory joined in a water resistant joint assembly to each supply conductor and ground conductor of the unheated lead.

This page explains the DCM-PRO spacing guidelines and recommendations.

Warmup now offers our own DCM-PRO cable, which is a custom designed cable compatible with all uncoupling membranes.

This page explains the type of thinset recommended and installation methods.

This page discusses the recommended practices of installing Warmup mats or cables in a shower.